One of the most favored water filtration systems that people use is the whole house water filters. They are quite effective, provide excellent quality water, and cover all the facets of your house. It is a more efficient technique where you get the same quality water from every facet of your house at a time. There is no need to fix different filter systems with some or every tap of your home to get the purified water.
These whole house water filters are installed at a point from where the water enters your house. The incoming water gets treated with available filters, becomes clean, pure, and healthy, and then moves forward to reach to every faucet.
So, if you are finding the best whole house water filter, then you are in the right place. Here we have mentioned seven best filter systems available on the market. So, you can go through them to select the best one according to your needs.
But, first, there are some factors that you must consider before going to purchase your product. So, let’s start with the buyer’s guide. Also, check our list of top countertop water filters.
Best Whole House Water Filters
1. Express Water Heavy Metal Whole House Water Filter
- Product Dimensions: 23.5 x 8.5 x 29.5 inches
- Weight: 65 Pounds
- Capacity: 100,000 gallons
More Fetures: Moreover, the filtration system doesn’t waste water with no pressure loss.
This filtration system helps you to enjoy bathing without a hint of harsh chlorine. It takes care of your appliances and offers healthiest drinking water from every tap of your home.
It features 3-stage high-capacity filtration that includes Sediment Filtration, Kinetic Degradation Fluxion, and Carbon Block Filtration. All these large capacity filters combine to clear away harmful contaminants from water including chlorine, chloramine, copper, aluminum, iron, lead, turbidity, hydrogen sulfate, fungi, dirt, sand, viruses, VOCs, and so on.
It comes with a standing stainless-steel frame that provides stability. The easy-to-setup design saves your time. Also, its maintenance is hassle-free. It is quite easy to keep an eye on your system with the help of a transparent first stage housing that lets you know the time when to replace a filter.
Other features include easy pressure release buttons and pressure gauges.
2. Home Master HMF2SMGCC Whole House Water Filter
- Product Dimensions: 9 x 18 x 25 inches
- Weight: 36.4 Pounds
- Capacity: 95,000 gallons
More Fetures: Other than this, it offers a hassle-free installation. Moreover, the oversize filters also save your time and money as they cut down the maintenance frequency.
This Home Master Whole House Water Filtration System is a 2 stage water purifier that works efficiently and effectively to eliminate various harmful contaminants from the water. The system removes up to 95 percent of impurities that are responsible for changing the taste, quality, and odor of the water.
The first stage features a multi-gradient sediment filter that removes dirt, debris, and bacteria. It has four filtration layers from 25 to 1 micron that make the water free from these impurities. The second stage features activated catalytic carbon filter that is responsible for removing heavy metals, chemicals, chlorine, and chloramine.
Another good thing about this filtration system is its oversize filters. These filters are designed to provide excellent flow rate. The enormous filter housings provide good water pressure that is 10 gallons of water in a minute.
3. iSpring 3-Stage Whole House Water Filtration System
- Product Dimensions: 21 x 8 x 28 inches
- Weight: 2.88 Pounds
- Capacity: 100,000 gallons
More Fetures: These Carbon Block filters feature coconut shell carbon for maximum filtration. They have an excellent life span of 100,000 gallons of water. Moreover, this filter system doesn’t remove healthy minerals from water that is a plus.
The water gets treated first with the PP Sediment filter that eliminates dust, rust, dirt, and sand. The smallest filtration layer is of 5 microns that prevent the dust and dirt passage well. The other two filters are Carbon Block filters that remove chlorine, VOCs, and harmful chemicals and improve the water taste and odor.
The design and quality of the system reduce the maintenance frequency. But it slightly reduces the water flow as well. The 1-inch inlet and outlet slightly decrease the water flow. Also, the size of the cartridges reduces the water pressure up to some extent.
4. Culligan Whole House Sediment Water Filter
- Product Dimensions: 7.5 x 8.3 x 16.3 inches
- Weight: 8.25 Pounds
More Fetures: Also, the output water increases the life of your appliances that come in regular contact with the water.
It features 1-inch inlet and outlet connectors that are made up of stainless steel. Other than this, it has an integrated bracket design, bypass valve, and a battery-operated filter life monitor.
The filter cartridges that this product is compatible with are CW25-BBS, CW5-BBS, R50-BBSA, CP5-BBS, and RFC-BBSA. So, it is up to you to select a particular one for your filter. But overall, these filters are capable of reducing aesthetic chlorine odor and taste, coarse sand, dirt, rust, silt, fine sand, and scale.
The removal of dust, sand, and scale from water keeps your faucets and plumbing systems free from chocking.
5. 3M Aqua-Pure Whole House Water Filtration System
- Product Dimensions: 6 x 6 x 27 inches
- Weight: 7.5 Pounds
- Capacity: 100,000 gallons
More Fetures: The cartridges used in this filter system are sanitary designed. It means that during their replacement, you will never get in contact with the filter media.
This 3M Aqua-Pure is a simple, long and effective whole house filtration system that is ideal for homes and offices. It offers a high flow rate up to 20 gallons of water per minute.
The system features a carbon media filter that is responsible for reducing chlorine from water to enhance its taste and odor. But it doesn’t make your water free from dirt and rust. So, for this, you have to install a pre-filter system in front of it to remove the rust, dirt, and sediment.
It is also quite easy to install. The stainless steel head allows hassle-free system installation. Also, the cartridges are easy to replace. No tools are required for that.
6. Reverse Osmosis Whole House Water Filtration
- Product Dimensions: 16 x 8 x 12 inches
- Weight: 11.85 Pounds
More Fetures: It works well with the water pressure of 20 to 80 psi so make sure that you are getting that pressure to keep your system in a working condition.
Reverse Osmosis Revolution offers a 2-stage whole house filtration system that comes with three extra sets of filter cartridges. It features 3/4 inches input and output valves that reduce the flow rate of water up to some extent.
The size of the cartridges that this system uses is 10 x 25 inches. The first stage of the process uses a sediment filter of 5 microns. It prevents dust, sand, scale, rust, and silt from passing with the water flow.
Other than this, the system also removes chlorine, VOCs, and chloramine, and improves the water taste and odor with the help of 5-micron high capacity CTO block filter.
7. Aquasana 1000,000-Gallon Whole House Water Filter
- Product Dimensions: 9 x 46 x 44 inches
- Weight: 41.7 Pounds
- Capacity: 1,000,000 gallons
More Fetures: The system doesn’t waste any water, so it is a plus for you. Other than this, it comes with a filtration tank, shut-off valves, filters, bend supports, and brass fittings.
The last but not the least whole house water filter is from Aquasana that has a high capacity of producing 1,000,000 gallons of fresh and clean water.
The system is responsible for removing chlorine from water up to 97%. It improves the water taste and odor along with reducing higher levels of mercury, lead, pesticides, and other contaminants like rust, silt, and so on.
The main drawback of this filter system is that its customer service is not supportive. Also, its installation is hard as you must have a Pex Crimper for this. Professional plumbers carry this tool, so you have to call a plumber for installing this product.
Before selecting the whole house water filter for your house, there are few things that you must look at. So what are those factors that need your consideration? Take a look.
No of Stages/ Filters
The first thing that you must look in is the number of stages it features. It is good to have a 3-stage filter system because these systems are responsible for removing most of the contaminants from the water up to a great extent. Also, it depends on the type of filters a system uses. Most of the systems come with Sediment and Carbon filters. Also, some filters have three to four layers that provide great filtration.
So, it all depends on your needs and the type of water you are getting. If you only want to get rid of chlorine, sand, and rust, then you can go for two-stage filtration systems. But if other different harmful impurities are coming to your way, then the three-stage filter is a must.
The flow rate of the filtration system also must be considered. It is ideal to have a system that can offer 10 to 40 gallons of water per minute. The higher the flow rate, the better it will be for you. The size of the filters also plays a vital role in the flow rate. So, make sure the size is decent enough.
Life of the filter
Filters having higher life span are ideal to buy. It saves your time and money as well. But the replacement cycle depends on various factors such as the flow rate, type of filter, and the amount and type of contaminants present in the tap water.
It is also essential to look at the micron rating of the filter. Many filters can block particles larger than 1 micron which make them effective. But there are also some top-notch filters that can block any impurity larger than 0.35 microns which makes them far more superior as compared to those having 1-micron capacity.
So, it depends on the contamination present in your water. If it is highly contaminated, then it is recommended to go for those that can block anything more substantial than 0.35 microns.
Installation and filter replacement
Always try to buy those whole house filtration systems that are easy to install. You may ask a plumber to fix it, but if a filter system comes with clear instructions, then it is quite possible to install the unit by yourself. Also, make sure that the cartridges are easy to replace.
Here, you are going to know how to install a whole house water filter. It is not challenging to install the unit by yourself; you have an instruction manual that you can follow step-by-step. But if you can’t, then it is better to call a plumber to this job for you.
Select an ideal location
First of all, it is essential to select a perfect location for the installation of your whole house water filter. It must be installed at a point from where the water enters your house but make sure that you can reach that point easily every time as you will have to change the filter cartridges regularly.
Switch of the main water supply
The next thing is to switch off the main supply line so that you can start installing your product. Also, never forget to drain the system.
Cut the available pipe
If you have a pipe cutter, then cut the pipe carefully. If you don’t have, then borrow it from your neighbors. Make sure that you are cutting it accurately according to the requirement.
Install the fittings
Now, read the instruction manual carefully and act accordingly. Gather the compression nuts and plastic and brass fittings to install them as per instructions. One thing you must do is to secure your fittings with the Teflon tape.
Install the filter
After installing the nuts and fittings, it is the time to install your filter unit. Make sure that you are installing it by keeping the in and out ports in mind.
Check for leakage
To check the leakage, first, turn on the main water supply but keep the inlet valve off. If there is no leakage, then turn on the inlet valve to check it further. But if there is any leakage then cover it up.
After checking the leakage and covering it up, your filter is ready to use.
For changing the filter cartridge, follow the below-mentioned steps.
Turn the inlet valve off
First, it is necessary to turn off the inlet valve of the filter. There is no need to turn off the water supply, just shut down the inlet valve.
Make use of the wrench
To open the housing and to remove the filter cartridge, use the available wrench. Make sure that you are doing this gently.
Clean it up
After removing the used filter, clean the housing properly. You can use the dry cloth to do that.
Install the new filter cartridge
Now, place a new filter cartridge inside and tighten up the housing with the help of the same wrench.
Turn the inlet valve on
Your filter cartridge is changed; now turn on the inlet valve.
Allow the water to pass the filter for 10 minutes or so before using.